• Home
• Glass Pool Fence Sydney ⭐️

Glass Pool Fence Sydney ⭐️

Frameless Glass Pool Fence Panels, Spigots & Gate Supply in Sydney

 

1. Design your pool fence - calculate panel size and quantity

We offer a range of panel sizes, with widths from 200mm to 2000mm in 50mm increments and a standard height of 1170mm. Custom cut-to-size panels are also available for special designs.

Our glass panels are made from 12mm thick A-grade toughened safety glass, complying with AS/NZS 2208:1996 Safety Glazing Materials in Buildings for maximum safety.

If you are unsure how to calculate panel size, quantity or design a pool fence, just email the dimensions or a drawing to sales@factoryonline.com.au - We will design it and provide a quote.

 

 

2. Pool gate & hinge panel

The pool gate can be hinged to a hinged panel, wall or square post. We stock a variety of gate and hinge panel sizes in the below list to suit your needs.

Gate hinge types: glass to glass, glass to wall / post.

Gate latch types: glass to glass, glass to wall or post, glass to glass 90 degree.

* The gate must swing outwards (away from the pool area). The gate hinges and latch should have a Self-closing and Self-latching features for added security.

 

 

 

 

 

3. Glass spigots selection

• Generally, 2 spigots per panel are needed. For panels over 1800mm wide, use 3 spigots.

• We supply deck mount (screw-in) and core drill heavy-duty spigots in mirror, satin, and matt black finishes. And we also offer Non-Conductive, Insulated 2205 Stainless Steel Spigots, required if the pool fence is within 1.25m from the pool water, in compliance with regulations.

• Our spigots are Australian-engineered with full NATA accreditation, meeting AS1926.1-2012, AS1288-2021 and AS1170.1 standards. Made from solid Duplex 2205 stainless steel, they offer twice the corrosion resistance of 316L stainless steel. 

 

 

 

Spigot Placement Calculation:

Distance from spigot center to the glass edge = Panel Width ÷ 6

(e.g., 1200mm panel → 1200 ÷ 6 = 200mm)

 

 

4. Other materials:

Custom cut to size raked pool panel service is available. Email drawing to: sales@factoryonline.com.au, or bring the template to our warehouse to get a quote.

We also supply stainless steel levelling stands, posts and steel glass pick-up frames.

 

 

5. Select glass clamps

Adding glass clamps is a great option if your glass pool fencing is in high-wind areas, coastal locations, or feels wobbly after installation. The clamps provide additional support to securely hold the panels in place.

 

 

______________________________________

 

Frameless Glass Pool Fencing Regulations in NSW: What You Need to Know

• Compliance: Glass pool fences must meet AS1926.1-2012 Swimming Pool Safety Standards.

• Height Requirements:

  • The minimum fence height must be at least 1200mm.

  • Our Factory Online glass panels have a standard height of 1170mm.

  • With bottom spigots raising the panel by approximately 60mm, the final installed height exceeds 1200mm.

• Gap Restrictions:

  • The gap between the fence panels and the ground must not exceed 100mm.

  • The recommended panel-to-panel gap is 30–60mm, commonly chosen by installers.

• Gate Requirements:

  • The gate must swing outwards (away from the pool area).

  • Hinges must be self-closing, and latches must be self-latching for safety compliance.

• Glass Specifications:

  • The glass must be A-grade 12mm toughened safety glass, complying with AS/NZS 2208:1996 Safety Glazing Materials in Buildings.

 

✅ Our pool glass panels, spigots, hinges, and latches are fully compliant with AS1926.1-2012. 

✅ We provide complete certification for submission to pool certifiers.

⚠️ Using non-compliant glass and hardware poses safety risks and may lead to issues with building authorities and local councils. Always choose certified materials for your family’s safety.

 

 

---